How to: Making a DVD with WinAVI Video Converter.

The Id10t's guide to making a DVD with WinAVI Video Converter.

This is relatively simple (to use) software, and does not allow for much user input, or encoding options, except encoding an avi, and putting it into the correct container, to burn a dvdr. For a quick and simple way to get video to dvd, it works rather well, and puts out a remarkably good quality dvd, even on it's "Speed" setting.

Using WinAVI Video Converter.
From it's first menu screen, select the larger DVD button.
You are immediately presented with a window, in which you browse your computer and find the avi file you wish to make into a dvd.
Click on that file, and you are shown the first of 2 option windows.
Here you must select the folder you want to hold the finished file, the "output directory".
Output format should be DVD, although the options for (S)VCD, mpeg2, and even non-standard VCD are available.


Click on the Advanced button.
Here is where you can choose the limited options available.


First, on the DVD tab, there is "Constant video quality", and "Constant video size".
If you choose Constant video quality, you must specify the quality you want, rated from Lowest to Highest.
Lowest may produce an inferior video that is difficult to watch. Highest may produce a video that is so large, it must be split into multiple disks. Medium may produce a video that is slightly too large for one disk, and a waste of space to burn on two.
No matter what quality you choose, you must also select to split the file or not, and if so, split it at what size.
DVDR is 4300MB, so don't choose a number larger than that, unless you are prepared to use DVDShrink or similar program later. In which case, it is redundant to encode at a high bitrate, if you're going to lower it later.
Much easier, is to choose Constant Video Size.
Disk Capacity is 4300MB, and 1 disk.
This will guarantee that the whole video will fit on one dvdr.
The next option is for chapter points. WinAVI allows you to set chapter points only by time. If you want a chapter every 10 minutes, set this to 600 (10 min times 60 seconds = 600 seconds). Remove the tick mark if you don't need any chapters.

The next option is to choose the target format, based on your location. Auto will encode the video at the same format that it was recorded in. NTSC for North America (and a few other places) and PAL for most of Europe (and a few other places).
Aspect ratio is next. This can be a very confusing setting, but is fairly simple to figure out.
Get Gspot, and open the avi. It will show you the size of the video.

The choices WinAVI gives us is Auto, 4:3 and 16:9.
Auto is going to select the closest aspect to the original. In this case 4:3 (352 is approximately 1.47 times 240)
If it were a 16:9 video, Gspot would report 1.8:1
Next is something called "Preference", and the two choices are By Speed, or By Quality.
By Speed, in this case, ignores picture quality (or lack of) in favor of producing the output as quickly as possible.
By Quality, is ignores speed, in order to produce the best quality it can.
Output of the first is generally within the size you specified, but can vary a fair bit. Output of the second is better quality, but only very slightly, and adds a significant amount of time to the process. Sometimes double.
The last two options on this screen are for audio. Bitrate recommended is 128000 or more, although going past 224 is probably a waste, unless you have a VERY high quality avi, encoded with Dolby digital 5.1 audio, then select 224000, and please leave the tick in the box marked "Enable Direct AC3". If the avi was encoded with AC3 audio, the original audio will be used in the mpeg output, thus no loss in quality.
Next, on to the Encode tab.

Picture Clip is used to crop portions of the video. If you have an anamorphic avi for input, you can correct it's aspect here. The detailed settings for this are beyond the scope of this guide. (In other words, I haven't got a clue here either )
Source target rate allows you to manually select the source avi's framerate. Why? I haven't got a clue. Leave it on Auto.
Source aspect ratio allows you to manually select the source avi's aspect ratio. Again Why? Leave it on Auto.
Adjust aspect ratio for pictures. This is anyone's guess. Don't put a tick mark in, who knows what it will do.
Soften picture does just that. If the video input is harsh, maybe too much contrast, and you want everything to look like you're watching it through frosted glass, tick this box.
Make upside-down picture. OK, If you want to watch your videos while standing on your head, check this box.
Click OK.
Click OK again.
Fortunately it has a fairly fast encoder engine, and a 1.5 hour avi should take between 40 and 80 minutes to encode (depending on if you chose Speed, or Quality above).
It's output resides in a folder called "dvd_0" and is in the form of an AUDIO_TS folder, and a VIDEO_TS folder.
Nero, and most other good burning software, will burn these two folders directly to dvdr.
You can test your output in a good software player such as WinDVD or PowerDVD, and I recommend doing this before burning.

Cheers, and happy DVDing
reboot

Easy RM RMVB to DVD Burner 1.3.7

Easy RM RMVB to DVD Burner is a fast, high quality DVD authoring and burning program that helps you to convert RM RMVB files to DVD and burn DVD disc with easy.

Easy RM RMVB to DVD Burner supports generate DVD image and save to hard disk,or burn hard disk DVD iamge to blank disc.supports both NTSC and PAL TV system.Supports 4:3 and 16:9 aspect ratio.

Here are some key features of "Easy RM RMVB to DVD Burner":
· Creates DVD from RM RMVB files and burn to blank DVD disc
· Generate DVD image and save to hard disk
· Burn hard disk DVD image to blank DVD disc
· Super fast conversion speed provided as it full supports Intel Pentium D Dual-Core Processor and AMD Athlon? 64 X 2 Dual-Core Processor which ensures full use of your CPU
· Merge up to 3 hours of multiple movies or episodic files to one DVD
· Multithreading and batch conversion are supported and the more files you convert the faster Easy RM RMVB to DVD Burner works than other DVD creators
· So easy to use that only ONE click is enough to burn a DVD after you loaded the video files
· Supports device types include DVD-R/ DVD+R/ DVD-RW/ DVD+RW
· Support NTSC and PAL
· Support 4:3 and 16:9 aspect ratio
· Add letterbox to keep the original aspect ratio
· All encoders/codec are built-in and any supported conversion can be done once you downloading the software
· Make excellent output quality
· Neat User Interface,very easy to use,without any complicated parameter settings
· No ASPI drivers needed
· Lifetime FREE Technical Support and FREE upgrade


Requirements:
· 500 MHz or higher CPU(Intel P4 is strongly recommended).
· DVD writer drives.
· 8.5 GB or more free disk space.


Limitations:
· 50-percent conversion trial

Download: http://www.regnow.com/trialware/download/Download_easy_rm_to_dvd.exe?item=15058-5&affiliate=22260
Operation System: Windows All
License: Demo
Size: 4.31 MB
Date: 2007-03-15 04:08:31

UNLOCK:
crackdb.org/get_97649_Easy.RM.RMVB.To.DVD.Burner.v1.3.7_crack.html
crackzplanet.com/get_236582_Easy.RM.RMVB.To.DVD.Burner.v1.3.7_crack.html

Startup Faster! 3.02

Computer is getting slower and slower? Does Windows spend more and more time loading? Does your hard drive make a loud noise when you boot Windows? Here's the complete solution! Startup Faster! 2004 makes Windows startup faster than ever before! Startup Faster! 2004 is a revolutionary tool that makes your computer startup much faster; it even protects your hard disk from sudden failures. Just setup Startup Faster! 2004 and you’ll see immediate results.

My Windows is booting slower and slower, why?
As you may know, some programs will load automatically together with Windows startup. These programs are normally called "Autorun program", on a computer used for several months, there're usually 30-40 programs launched on the same time on startup, the more programs get launched on startup, the slowr the computer will be. That's why some top-level computer looks not that fast, even not faster than a lower level computer with Startup Faster! installed.

What benefits can I get from Startup Faster!?
Startup Faster! is just designed to solve this problem. We developed an unique technology called "SmartBoot” to speed up the startup process. With "SmartBoot", Startup Faster! could optimize your boot sequence by adjusting execution time and disk load. It controls Windows loading and makes great improvements! From thousands of tests on various computers, Startup Faster! can speed up your loading speed by 200% to 500%!

Startup Faster! supplies a Startup Manager interface to Enable/Disable/Delete any program in the startup list, remove unnecessary program from being launched automatically will also improve boot speed.

A straight-forward and easy-to-use interface
For most computers, only require “set and forget.” With Startup Faster! you don’t even need to open the control panel! Startup Faster! will do everything for you: if you need to adjust for better performance, Startup Faster! provides you with friendly user interface, detailed instructions and no confusion.

Why do I need Startup Faster!?

Save time
Startup Faster! greatly reduces the loading time of Windows, it saves you a lot of time every time you restart. Even if you are using a slow machine, you will find your computer is performing at least 2 times faster.

Protect your hard disk
Perhaps you've heard that mass read and write of hard disk within short time can do great harm to hard disk, actually that’s one reason that caused hard disk to crash. If you install programs often and your startup list is filled with various programs, the risk will get higher. for the hard disk is running its’ capacity. Startup Faster! effectively reduces the loads of hard disk, as well as reduces the disk noise. Try Startup Faster! once and you will see the difference!

Manage the startup list
It's not an easy job to run programs in a certain order without Startup Faster!. The order is important in some cases, since some programs depend on other programs so they must be launched in order. Another example, launching smaller program first will get systemto be ready faster.

There's also another common problem: some programs leave dead links in startup groups and registries, even if the programs were uninstalled. Startup Faster! can find and remove these dead links. You can also manually remove or add any program to your startup list. With Startup Faster! you take full control.

http://rapidshare.com/files/77149129/Startup_Faster__v3.02.rar

System Mechanic v7.5.3 Professional + Serial

System Mechanic 7 Professional is five complete products in one integrated package: everything you need to keep your PC safe, fast, and error-free

Fix problems, boost performance, eliminate crashes, defend against spyware, viruses, and hacker threats, and much more. Use one centralized system dashboard to automatically perform all vital PC maintenance

More than just Internet security, System Mechanic 7 Professional is a complete solution for PC protection, system optimization, and trouble-free maintenance.

You need more than just security software to keep your PC running right. Without regular internal maintenance even the best protected PC will suffer problems and eventually grind to a halt. System Mechanic 7 Professional contains all of the tools you need to defend against threats, and also keep your PC running smooth, fast, and healthy from the inside out.

Trusted by millions worldwide, System Mechanic Professional sets a new standard for total PC security and optimization in one integrated package.

5 Products in One
System Mechanic 7
AntiVirus
Personal Firewall
Search and Recover 4
DriveScrubber 3

Product Features:
* Optimize your PC for peak performance, maintaining reliability and speed
* Repair problems and errors, and prevent them from re-occurring
* Avoid security vulnerabilities with iolo AntiVirus and iolo Personal Firewall
* Recover deleted files, photos, email, and more from any drive or media with Search and Recover 4
* Securely erase data from your hard drive with DriveScrubber 3

http://rapidshare.com/files/77660559/System_Mechanic_v7.5.3_Professional.rar

Smart PC Professional 5.3

Smart PC Professional makes your PC faster, error-free and more efficient!
-- Smart PC Professional ensures your personal privacy while surfing through the Web and protects your PC from information theft.
-- Smart PC Professional supports Mozilla Firefox, Internet Explorer, Netscape and Opera web browsers.

Fix up your PC!
You can fix your computer by yourself. Use the software to detect, diagnose and repair all types of PC problems. Regular use of the software will keep your computer running smooth and error-free without system failures.

Clean up your PC!
Normal operation of your PC generates lots of junk files some of which contain private information. The software easily detects useless junk and safely removes it reclaiming valuable disk space, ensuring personal privacy and security.

Optimize your PC!
Do you want to make your computer more powerful? The software can drastically quicken Window's startup time and the performance of all applications.

http://rapidshare.com/files/80554716/Smart_PC_Professional_5.3.rar